Intake Valve Actuator Solenoid Test using Caterpillar ET Software
Intake Valve Actuator Solenoid Test (OnHighway Trucks)
-
Purpose
The Intake Valve Actuator Solenoid Test can be used to verify the
operation of the Intake Valve Actuator Solenoid on one or all
Cylinders. These tests provide a method for finding wiring or solenoid problems, and they are performed in the same manner. When either test is completed, the data can be analyzed to determine if all of the
Cylinders are running effectively.
-
Accessing
To run the Intake Valve Actuator Solenoid Test:
1). Select Diagnostic Tests from the Diagnostics menu
2). Select Intake Valve Actuator Solenoid Test from the sub-menu.
3). Click Start. The test screen is displayed
The Test Screen has the following areas:
A). Display Area
The Display Area has three columns:
Cylinder/Description – Lists the available Cylinder numbers.
Mode – Displays the current mode of the Cylinder, whether it is “Powered” or “Cutout”.
Test Result – Displays “Open,” “Short,” or “OK” after the test has completed
B). Buttons
The Buttons available on Test screen are:
Start – Click to begin the test. Once clicked, this button is disabled until the test is stopped.
Stop – Click to stop the test. Once clicked, this button is disabled until the test is restarted.
Power All – Click to return all Cylinders to the powered, or active state. Cutout All – Click to change the state of all Cylinders to Cutout
Change – Click to change the state of the Cylinder.
Changing the state of the Cylinder allows solenoid troubleshooting by “cutting out” and subsequently repowering an individual Cylinder.
Contact Us
★ Whatsapp: +84 858966333
★ Skype: vietvehicle@gmail.com
★ Wechat ID: Vietvehicle
★ Zalo: +84858966333
★ Email: Service@vietvehicle.com
★ Fanpage: https://www.facebook.com/Vietvehicle/
★ Website: https://vietvehicle.com/
★ Youtube chanel: VIETVehicle