Cumming INSITEE 8.7 (2021) + Fleet count + Zapit password

77$193$

Cumming INSITEE 8.7 diagnosis software and Cummins engine programming 

You can do every job you want to include special features like calibration, Programing ECM, increase  power, update ECM

All Cumming engine model

  • Automotive
  • Industrial
  • HHP/ PowerGen
  • Other
Clear

Hello, are you looking for specialized diagnostic software for Cumming engnie

Your purpose is to read & clear diagnostic trouble codes, cruise control options, set rev limits, control idle shutdown, set idle speed, set fan functions, enhanced ECM security….

Advanced features on Cumming Insite software: Programing ECM, increase  power, update ECM… combined with INCALL.

If you are needing to perform the above features, please refer to the Cumming Insite software from vietvehicle.com.

1.  What is Cumming INSITEE?

Cumming INSITEE is a Cumming engine diagnostic software installed on the computer, with step-by-step diagnostics, integrated circuit diagrams, so the use of Cumming INSITEE software becomes easy. With strong support from Cumming INSITEE software, it will help you to reduce the time to handle faults more quickly and accurately so that your vehicle can operate normally.
Technicians can perform accurate diagnosis of trouble symptoms, calibration, programming entire Cumming engine.

In addition, Cumming has many other software such as:

INCALL: Calibration file

– Cumming Quickserver: Repair manual software

– Cumming Inpowerr: Software specialized for Cumming generators

– Cumming Caltem: Tuning software for Cumming engine

2. Software information

  • Name: Cumming INSITEE
  • Version: 8.7.0.86
  • Level: Pro
  • Capacity: 1.8 GB

cummins insite support

2.1. Supported model

All Cumming engine model

  • Automotive
  • Industrial
  • HHP/ PowerGen
  • Other

New Product Support

B3.9 CM2620 B171C B6.7 CM2670 EUVI F4.0 CM2620 NSVI QSB6.7 CM2450 KT4 QSL8.9 CM2450 KT4 QSZ14 CM2670 CSIV

2.2. Softwrae Features 

  • Automatic engine recognition
  • Read & Clear Diagnostic Trouble Codes (DTCs)
  • Data List
  • Graphical Monitoring
  • Engine Diagnostic Tests (Injector Cut- Out, EGR Valve, Turbo…)
  • Parameter Vehicle Adjustment
  • Wiring Diagram and Sensor Location
  • Built-In Help & Troubleshooting
  • Calibration Downloads

With Pro version (enhanced features)

  • Update ECM software (work with incal)
  • Remove ECM password (zap it)
  • Uprade torque (fuel/ air ratios….)
  • Control PTO, cruise control options, set rev limits, control idle shutdown, set idle speed, set fan functions….
  • Enhanced ECM security
  • Calibration downloads

New Base Features

Calibration Security
In December 2020, new calibrations will be released using current industry standard encryption. This will require use of INSITEE 8.7.0 or greater when using these calibrations downloaded from Quickserve Online (QSOL) or using the ECM Code Search feature within INSITEE.

New Diagnostic Tests
NOTE: These will only display if supported and enabled in the calibration

Aftertreatment Diesel Exhaust Fluid Doser Accuracy Test
Performs a check of the complete dosing system by commanding the doser to dose at a fixed rate for a fixed amount of time.

New Advanced ECM Data
NOTE: These will only display if supported and enabled in the calibration

Engine Protection Main Bearing Temperature
Provides the ability to derate torque or speed (RPM) to prevent damage when the temperature of any of the main bearings surge above its threshold. A record of the last five speed and/or torque derate events and information about the configuration of the derates and shutdowns is maintained.

Engine Protection Intake Manifold Temperature
Provides the ability to derate speed or torque and shutdown the engine to prevent damage when an extreme condition is detected. A record of the last five speed and/or torque derate events and information about the configuration of the derates and shutdowns is maintained.

Engine Protection ECM Internal Temperature
Provides capability to initiate time-based torque derates and time-based torque shutdowns when internal temperature of ECM goes above its threshold. A record of the last five speed and/or torque derate events and information about the configuration of the derates and shutdowns is maintained.
Engine Protection High Temperature Coolant Level Low
Provides ability to derate torque and shutdown the engine to prevent damage. A record of the last five speed and/or torque derate events and information about the configuration of the derates and shutdowns is maintained.

New Features and Parameters
NOTE: These will only display if supported and enabled in the calibration

Door Open Switch Multiplexing
Allows configuration to use switch input and set source address via the datalink instead of a physical ECM input.

Brake Vacuum Low Warning Signal
Allows configuration to use switch input and set source address via the datalink instead of a physical ECM input.

Aftertreatment Diesel Exhaust Fluid Doser Air Pressure Sensor Rationality
Provides the ability to monitor the pressure rationality of air pressure sensor in DEF dosing system.

Aftertreatment Diesel Exhaust Fluid Doser Pressure Sensor Rationality
Provides the ability to monitor the pressure rationality of DEF pressure sensor in DEF dosing system.

OEM Load Based Control
Allows configuration of either a single speed breakpoint setup or a dual speed breakpoints setup which is designed to keep the engine from operating in regions that are not beneficial to engine performance.

DCDC Low Voltage Output
Provides the ability for the system to accurately compensate various low voltage outputs.

Hybrid System Protection Override Switch Multiplexing
Allows configuration to use switch input and set source address via the datalink instead of a physical ECM input.

Momentary Start Switch Multiplexing
Allows configuration to use switch input and set source address via the datalink instead of a physical ECM input.

Oil Quality Sensor
Provides several monitors for data provided by the oil quality sensor.

cummins insite crack 1

2.3. System Requirements

  • Free hard drive: 15 GB or more
  • CPU: Core i3 or above
  • Ram: 4GB or more

Note: INSITEE 8.7.0.86 version only supports WIN 10 system

2.4. Supported Hardware

  • Cumming INLINE 5, 6, 7
  • Nexiq USB link 1, 2
  • DPA5
  • Noregon DLA
  • And some other RP1210 devices

3. Why do you need to use Cumming INSITEE?

Today, the electronic control system on the truck is increasingly modern and complex, you cannot only repair with experience, you need the support of tools and equipment, one of which is a diagnostic tools so that the problem can be identified more easily and quickly.

Currently on the market, there are many types of diagnostic tools that can support this. However, in terms of support features, it will not equal to Cumming specialized software. Indeed, the software of these diagnostic tools based on Cumming INSITEE software. That is why you should use the software Cumming INSITEE 8.7 to help maximize the functionality on these Cumming engine lines

cummins insite 8.7.0 new full keygen

4. Who should use this software?

This software is suitable for many different users: repair man, technicians or vehicle owners, transportation businesses owner that using Cumming engines:

  • For repair man or technicians, you need specialized diagnostic equipment and software to better assist in repairing these vehicles.
  • For vehicle owners or transportation businesses, you need software to modify vehicle parameters to optimize operation and most importantly is to increase horse power.

Quick remote installation service

You are concerned about your computer skills or software installation skills that cannot install this software yourself. Don’t worry, VietVehicle.com’s team will assist you, we provide remote software installation service for you, make sure the software works ok as long as your computer has a stable Internet connection and Teamviewer software installed, all the rest we will do for you all, you can go to bed or do other tasks. After waking up the software has been installed and you are ready to start your work.

In case you can install by yourself and want to buy full software (including keygen), choose the Installation Option: Full Software/ Install byyourself (only apply on some software)

Are you concerned about risk after payment?

We know you are concerned about the prepayment, receive the software later. Don’t worry, you should use Paypal and remember to choose a payment method Pay for goods or services, you will be guaranteed safety by Paypal.

It is a form of assurance that gives you peace of mind, but in fact you will never need Paypal to resolve a dispute, because we would not be foolish to exchange a Vietvehicle.com brand that we have built it. When there was bad feedback, our Paypal account was also locked. And will affect our brand. So if the case does not support you, we are ready to Refund the money you sent us.

Please refer: Refund policy

After-sales support policy

You are concerned the software error when using. You worry that you can not fix it yourself. You worry that it will take a long time affecting your work and many other problems.

We fully understand these issues by you. And to ensure the interests of customers, we have a clear policy on this matter, please refer to: After-sales support policy.

Are you concerned that you will not know how to use the software?

If you are newbie, you can refer to our videos on our Youtube channel. We regularly upload video instructions to test the vehicle or perform the functions of programming and DPF SCR delete. Is it important that you take the time and effort to learn?. There are many tutorials, and many videos and documents that are completely free.

Also, if you need us to do it for you, check out: https://vietvehicle.com/product-category/remote-tuning-service/

Some of our videos are below:

Shopping Guide

You are still wondering, do not know the purchase procedure, the payment methods or how to receive the products … Please refer: Shopping guide on VIETVehilce.com website.

Additional information

Installation

,

There are no reviews yet.

Be the first to review “Cumming INSITEE 8.7 (2021) + Fleet count + Zapit password”

Your email address will not be published. Required fields are marked *