For Share

How to use Switch and Sensor Intermittent connection test function on Cummins Insite?

Figure 1.1 – ECM diagnostic tests About The switch and sensor intermittent connection test helps identify wiring connection issues that...

How to change Cold Idle Warm up Parameter on Cummins Insite?

Figure 1.1 – Cold idle warm-up   The cold idle warm-up feature increases the engine’s idle speed to reduce warm-up...

MAN truck service manual and engine traning for free

FREE download here: 1). Engine Training: D 2876 LF 12/13 Common Rail (AT-01c). MAN D 2876 LF 12_13 Service Manual...

Figure 1.1 – ECM Diagnostic Tests The Engine State Monitor displays the active control state of an engine, including any...

How to fix Can bus Failure on Diesel Engine?

Figure 1.1 – CAN bus failure (Murphy PowerView) Definitions of CAN bus: Controller area network (CAN) is a serial bus...

How to use Cummins Update Manager ?

Figure 1.1 – Cummins update manager v7.5.0.20111 The Cummins Inc. update manager provides a means of delivering software and related...

How to use Fault Code function on Cummins Insite?

Figure 1.1 – Fault codes (1) The fault codes window displays an engine’s fault data, including both engine faults and...

How to use Audit trail function and set ECM clock on Detroit DDDL?

Hình 1.1 – Đặt Đồng hồ ECM (Đặt Đồng hồ) #Theo dõi kiểm toán (chỉ dành cho DDEC) Để hiển...

How to use Lockout function on Detroit DDDL?

Figure 1.1 – Lockout (DDDL warning) The lockout tab in the calibration window allows you to protect certain functions in...