For Share

Injector Codes Calibration using CAT ET Software

Injector Codes Calibration using CAT ET Software The Injector Codes Calibration function reads the programmed Injector Code from the ECM...

GHG17 Heavy Duty Machine FIS Low Pressure Leak Test by DDDL

GHG17 Heavy Duty Machine FIS Low Pressure Leak Test by DDDL. This instruction show you guide on how to use...

Accessing Parameter Lockout on CAT ET Software

Accessing Parameter Lockout on CAT ET Software Accessing Parameter Lockout on CAT ET Software The Parameter Lockout function allows parameters...

Cold Mode on Status Flags CAT ET Software

Cold Mode on Status Flags CAT ET Software   The ECM limits engine power during Cold Mode operation and the...

Difference between throttle body on gasoline and diesel engines

 Throttle body in Gasoline engine The ratio A/F optimal for gasoline to burn completely in the engine combustion chamber is...

What is boost pressure sensor (BPS)?

Boost pressure sensors are used in turbocharged engines to provide air pressure information and air and fuel ratios in order...

HOW TO RETRIEVE AND SAVE FLEET CALIBRATION USING DETROIT DIESEL DIAGNOSTIC LINK (DDDL)

HOW TO RETRIEVE AND SAVE FLEET CALIBRATION USING DETROIT DIESEL DIAGNOSTIC LINK (DDDL) Figure 1.1: Open Cal Data Files (Vehicle^1)...

Engine Overheating

1. Why do engine overheat ? An overheated engine can be caused by anything that decreases the cooling system’s ability...

Accessing Parameter Lockout CAT ET Software

The Parameter Lockout function allows parameters to be locked so that they cannot be changed anywhere in the Service Tool...